{"id":3352,"date":"2026-09-29T00:22:55","date_gmt":"2026-09-28T16:22:55","guid":{"rendered":"http:\/\/www.alasfourcosmetics.com\/blog\/?p=3352"},"modified":"2026-09-29T00:22:55","modified_gmt":"2026-09-28T16:22:55","slug":"what-materials-are-used-to-make-plastic-injection-molds-48fd-f9b349","status":"publish","type":"post","link":"http:\/\/www.alasfourcosmetics.com\/blog\/2026\/09\/29\/what-materials-are-used-to-make-plastic-injection-molds-48fd-f9b349\/","title":{"rendered":"What materials are used to make plastic injection molds?"},"content":{"rendered":"

Hey everyone, if you\u2019ve ever wondered how those sleek, durable plastic parts you use every day\u2014like your phone case, kitchenware, or even the tiny components in your car\u2014get made, there\u2019s a good chance plastic injection molding was behind it. And if you\u2019ve worked with injection molding before, you know the mold is the unsung hero of the whole process. It\u2019s the tool that melts plastic into the exact shape you need, and picking the right material for that mold makes or breaks production. As a plastic injection molding supplier who\u2019s been in this game for over 10 years, I\u2019ve seen so many folks skip over this step and end up with delays, bad parts, or even broken tools mid-run. So let\u2019s break down the main materials we use for injection molds, why we pick each one, and when you\u2019d reach for which. No stuffy textbook jargon here\u2014just real talk from someone who\u2019s dealt with a thousand mold projects. Plastic Injection Molding<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get the basics: injection molds are essentially two halves (the core and cavity) that clamp together, then get injected with molten plastic under tons of pressure, cooled, and popped open to release the part. The mold material needs to handle that heat, pressure, friction from the plastic resin, and maybe even corrosive additives if you\u2019re working with specialty plastics. Not just any metal works for this\u2014cheap steel that rusts or softens when heated? Total waste. Let\u2019s start with the most common one we use day-to-day: P20 tool steel.<\/p>\n

P20 is like the workhorse of injection molds, plain and simple. It\u2019s a pre-hardened steel, meaning it\u2019s already heat-treated to a hardness of around 30 HRC (that\u2019s Rockwell hardness, for the newbies\u2014higher = harder, more wear-resistant) right out of the box, so you don\u2019t have to do extra hardening work after machining it. That cuts down on lead times, which is huge for our clients who need parts fast. Why do we reach for P20 90% of the time for regular projects? It\u2019s affordable, it machines really well, and it holds up for medium-volume runs\u2014think 10,000 to 500,000 parts. I just wrapped up a run of 120,000 kitchen trash can lids for a big home goods brand, and their mold was P20. No issues, no extra wear, and the parts came out consistent the whole time. The only downsides? It\u2019s not great for super high-volume runs (those 1M+ part jobs will wear it out faster) and it\u2019s not super corrosion-resistant. If you\u2019re using a plastic with a lot of additives, like PVC that releases chlorine, P20 can rust over time if you don\u2019t coat it right. So we add a light polish and sometimes a surface coating like electroless nickel if the client needs it, but that\u2019s a quick fix.<\/p>\n

Next up, S7 tool steel. This one\u2019s for when you need a mold that can take a beating. S7 is air-hardening, has way higher toughness than P20\u2014like, it doesn\u2019t crack if you get a little slug of plastic stuck in the mold (which happens, trust me, we\u2019ve all been there). It\u2019s got a hardness around 55-58 HRC, so it\u2019s way more wear-resistant than P20. That makes it perfect for high-volume runs, thick parts that need more pressure to mold, or parts with a lot of sharp edges that would chew up a softer steel. Last year we did a mold for a manufacturer of power tool housings\u2014those parts get banged around a ton, and they needed 750,000 parts. We used S7 for the core and cavity, and we haven\u2019t had to touch that mold in over a year of runs. The only catch? S7 is way more expensive than P20, and it\u2019s a pain to machine. It\u2019s harder, so it takes longer to cut, which adds to the cost. We only recommend S7 when the volume or part requirements justify the extra cash\u2014you don\u2019t want to pay for S7 if you\u2019re only making 5,000 parts.<\/p>\n

For really high-volume, heavy-duty stuff, there\u2019s H13 tool steel. This is another heat-treated steel, similar to S7 but with better heat resistance. It\u2019s great for parts that need to be molded at really high temperatures, like engineering plastics\u2014think nylon, polycarbonate, or ABS with glass fibers added (those glass fibers are like sandpaper, man, they wear down soft steel fast). H13 hits a hardness of 52-56 HRC, and it holds up to thousands of cycles without losing its shape. We use H13 a lot for automotive parts, since those are often made with reinforced plastics and need to last for millions of parts. I had a client last year making interior car trim, and they needed 2.5 million parts over two years. H13 was the perfect call\u2014P20 would have worn out in 300k parts, S7 would have worked but H13\u2019s better for long, high-heat runs. The downside of H13 is it\u2019s not as tough as S7, so if you drop the mold or get a big plastic slug stuck, it\u2019s more likely to crack. We pair H13 with proper venting in the mold to cut down on pressure buildup, and that solves most of those issues.<\/p>\n

Now, what about when you\u2019re making super small, low-volume parts? Like custom prototypes, or small batches for a new product? You don\u2019t need a steel mold\u2014those are expensive and take weeks to make. That\u2019s when we use aluminum molds, specifically 6061 aluminum or 7075 aluminum. 6061 is the go-to for prototype molds: it\u2019s super easy to machine, way faster to cut than steel, so you can have a mold ready in 3-5 days instead of 2-3 weeks. It\u2019s also cheaper\u2014like, half the cost of a small steel mold. The catch is aluminum is way softer than steel, so it only works for low-volume runs\u2014usually 1,000 to 10,000 parts, max. But if you\u2019re testing a new product, getting feedback, or doing a small launch, that\u2019s all you need. We just finished a prototype run for a startup making wireless earbud cases\u2014they only needed 2,000 parts to test their packaging and marketing, so a 6061 aluminum mold was perfect. 7075 aluminum is the stronger, tougher cousin of 6061\u2014 it\u2019s a bit harder, so it can handle up to around 50,000 parts, which is good if your small batch is a little bigger. The only downside to aluminum? It doesn\u2019t hold up to high heat as well as steel, and it\u2019s not as wear-resistant for parts with sharp details. If you have a tiny, intricate part, aluminum might not get every detail as crisp as steel, but for prototypes, it\u2019s totally fine.<\/p>\n

Wait, there\u2019s another one I should mention: pre-hardened stainless steel, like 420 stainless. This is for when you need corrosion resistance. Like I said earlier, plastics like PVC, PET, or even some food-grade plastics can release moisture or chemicals that rust regular steel. 420 stainless is pre-hardened to around 50 HRC, so it\u2019s strong, and it\u2019s naturally corrosion-resistant\u2014no need for extra coatings. We use this for food-grade parts, like water bottles, or medical devices that need to be sterilized, which can be harsh on regular steel. Last year we did a mold for a baby food storage container, and that required FDA-compliant materials, so 420 stainless was the only call. It\u2019s a bit more expensive than P20, but way cheaper than specialty coatings, and it lasts for medium-volume runs without rusting.<\/p>\n

Let\u2019s talk about what we never use, too. Cast iron? Wait, no, some old molds used cast iron, but it\u2019s super brittle, cracks easily, and doesn\u2019t hold fine details. We stopped using it years ago. Carbon steel without any heat treatment? Total garbage\u2014 it softens when heated, rusts in a week, and breaks after 100 parts. Unless you\u2019re making a super rough prototype that you\u2019re throwing away after one use, skip that.<\/p>\n

Now, let\u2019s cut through the noise: how do we actually pick which mold material to use for a job? It\u2019s not just volume\u2014we look at the plastic resin, the part\u2019s complexity, the required lifespan of the mold, and the budget. For example: if a client wants a prototype of a custom toy, 5,000 parts max? 6061 aluminum. If they need 200,000 parts of a phone case made with ABS? P20. If it\u2019s 1.5 million parts of a power tool housing with glass-filled nylon? H13. If it\u2019s a food-grade cereal bowl, 100,000 parts? 420 stainless. We also factor in turnaround time\u2014if a client needs a mold in 3 days for a trade show prototype, aluminum is the only way, even if it\u2019s not for high volume.<\/p>\n

I can\u2019t stress enough how picking the wrong mold material hurts everyone. I\u2019ve had a client come to me a few years ago who used a cheap P20 mold for a 1 million part run of a car bumper, made with glass-filled polypropylene. By the 400,000 part mark, the mold was all worn out\u2014sharp edges were gone, parts were coming out lumpy, and they had to shut down production to re-make the mold. That cost them thousands in downtime, not just the mold. That\u2019s why we do a free consult with every client, right at the start, to figure out exactly what they need, and recommend the right mold material. We don\u2019t push the most expensive option\u2014we push the one that makes sense for their project.<\/p>\n

<\/p>\n

Now, if you\u2019re reading this and you\u2019re looking to start a plastic product, or you\u2019re tired of mold issues with your current supplier, hit us up. We\u2019ve got the experience to pick the right mold material, no hidden fees, and we stand behind every mold we make. Whether you need a 1,000 part prototype or a 5 million part production run, we can hook you up. No runaround, no jargon, just straight talk and quality molds that get the job done.<\/p>\n

CNC Metal Machining<\/a> References:<\/p>\n

    \n
  1. Rosato, D. V., & Rosato, M. G. (2000). Injection Molding Handbook. Springer.<\/li>\n
  2. Todd, R. H., Allen, D. K., & Alting, L. (1994). Manufacturing Processes Reference Guide. Industrial Press Inc.<\/li>\n
  3. Plastic Industry Association. (2021). Guide to Plastic Injection Mold Materials and Applications. National Plastics Council.<\/li>\n
  4. Davis, J. R. (Ed.). (2002). Tool Steels. ASM International.<\/li>\n<\/ol>\n
    \n

    Shenzhen Jingcheng Dingyi Forming Technology Co., Ltd.<\/a><\/p>\n

    Address: 1st Floor, Building 3, Huafeng Zhenbao Industrial Park, No.137 Shihuan Road, ShiYan Town, Bao’An District, ShenZhen, PRC
    E-mail: 13071475061@163.com
    WebSite:     https:\/\/www.jctop-cnc.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, if you\u2019ve ever wondered how those sleek, durable plastic parts you use every day\u2014like … What materials are used to make plastic injection molds?<\/span>Read more<\/a><\/p>\n","protected":false},"author":187,"featured_media":3352,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3315],"class_list":["post-3352","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-plastic-injection-molding-4954-fa0203"],"_links":{"self":[{"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/posts\/3352","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/users\/187"}],"replies":[{"embeddable":true,"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/comments?post=3352"}],"version-history":[{"count":0,"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/posts\/3352\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/posts\/3352"}],"wp:attachment":[{"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/media?parent=3352"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/categories?post=3352"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.alasfourcosmetics.com\/blog\/wp-json\/wp\/v2\/tags?post=3352"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}